Polk Audio Atrium SAT300

€ 199

Compact Staked Outdoor Loudspeaker 

The innovative Sat300 satellite speakers can be planted in your landscaping, hung from your ceiling or the eaves, or installed anywhere you want to mix great sound with the great outdoors. Designed to mimic stylish lighting fixtures whilst delivering high-performance audio, this is a full-range speaker that can blend into a wide range of landscapes and environments. And it’s designed to pair perfectly with a Sub100 for a real high performance audio system.

Image result for sat300 polk

Dynamic Balance® Driver Technology

3 1/2-inch long-throw midrange driver with 1-inch voice coil, vented pole-piece, rugged butyl rubber surround and composite cone; 3/4-inch composite dome neodymium tweeter.


Capable of handling up to 100 Watts of power to deliver superb clarity, detail and high efficiency with less distortion, at both moderate and higher volume levels, even in outdoor environments.

Tweeter Performance

Flying bridge-mounted tweeter never gets in the way of the woofer, for smooth, realistic sound in a compact housing.


Image result for sat300 polk

Bass Performance

Capacitive Coupling Technology is an advanced signal-blocking technology that determines exactly where a small speaker usually skimps on bass output. Special circuitry then compensates by boosting response in this critical frequency range. More bass response means a wider dynamic range with more musical realism.


Atrium Sat 300 withstands years of weather with a mineral-filled polypropylene housing, 1mm aluminium grille & stainless steel hardware. These speakers live outside year-round, with permanent colour impregnation and all-weather waterproofing and a 5-year warranty.


Maximum wiring flexibility with built-in high-performance crossover technology. The Sat300, with built-in high-pass filter, can be connected directly to its own amplifier channels for independent volume control. Or an easy two-channel connection can be made by connecting the three-speaker sub/sat system to your two-channel amplifier.

Image result for sat300 polk

  • Height
    7″ (17.78 cm)
  • Width
    5.5″ (13.97 cm)
  • Depth
    8.4″ (21.34 cm)
  • Weight
    3.25 lbs (1.47 kg)
  • Driver Enclosure Type
    Mineral-filled polypropylene cabinet
  • Driver Complement
    (1)  3.5″ (8.89 cm) d (Round) Dynamic Balance driver with extended motor structure, composite cone and butyl rubber surround – Midrange
    (1)  0.75″ (1.91 cm) d (Round) Dynamic Balance polyurethane tweeter with neodymium magnet – Tweeter


  • Total Frequency Response
    100 Hz – 22,000 Hz
  • Nominal Impedance
    8 ohms
  • Sensitivity (1 watt @ 1 metre)
    83 dB
  • Lower and Upper -3dB Limits
    115 Hz – 20,000 Hz


  • Recommended Amplifier Power Per Channel
    10 watts – 100 watts


  • Mounting Type
    Wall bracket


  • Mounting Type
    Hanging pendant


  • Mounting Type
    Stake with security plate


  • Rating



For more information, please visit this products webpage